Youtube Facebook
Show Cart
Your Cart is currently empty.

Model 8_760

Extremely accurate gas-independent fast-response transducer vacuum instrument

Model 8_760

 

Optional Features and Prices


Options Description Qty Price

Model 8_760 $467.50

2C The units listed with Control have the ability to turn on an external device via two SPDT external connections allowing controls to be activated at two vacuum set-points. The relays activate at and remain on below the set-points $75.00

mBar Displays vacuum reading in mBar $0.00

NISTCal Calibration of a Digivac Vacuum gauge against a NIST traceable standard with data $190.00

RS232 Enables vacuum measurement to be transmitted to a PC or another RS232 device through a DB9 female interface. Includes 6 foot DB9 male to female serial cable $75.00

Specifications
Power: 100-240VAC 50/60 Hz, CE rated
Vac Interface: 1/8 MNPT or KF/NW
Sensor: Digivac 760T
Range: 1-760
Units: Torr
Display: .56 inch high 3.5 digit red LED
Dimensions: Mounts in 2.66 inch panel hole with 3 screws on 1.60 inch radius
Sensor cable length: 10'
Analog out: 0-3V (if ordered)
Controls: 7 Amp, 250 Volt (If Applicable)
 
The 8_760 is an accurate, rugged and reliable vacuum instrument for measuring vacuum in the Torr range.  It uses proven piezoelectric transducer technology combined with solid state electronics that results in a tough gauge. This instrument is available by default as an absolute gauge but is also available as a differential gauge in quite a few units: inches of water, inches of mercury or PSI.  The 8_760 follows a 1000 Torr capacitance manometer through it's range for about 1/3 the price.  This unit gives accurate repeatable results with thousands used in commercial and laboratory applications with a wide range of options to fit your needs such as RS232 and plotting software.  If you are working with clean gas and require accuracy within 2 Torr, the model 8_760 is for you.
 
Vacuum instrumentation with everything you need to go to work
 
Each DIGIVAC vacuum gauge includes:
  • A vacuum gauge controller
  • A vacuum gauge tube (vacuum sensor)
  • A cable that connects the vacuum gauge controller to the sensor
  • An AC adapter that runs on 100-230 VAC, 50/60 Hz with line cord adapter
  • Pre-tested under actual vacuum against a NIST standard



Last Updated: Wednesday, 22 February 2012 14:02
Show Cart
Your Cart is currently empty.