Kurt J. Lesker
We are an Authorized reseller for Kurt J. Lesker . Here you can see the Variety of KJLC products we offer here at DigiVac
-
Lesker 275 Convection Sensor | 1/8″ NPT or KF25 | Convection Enhanced Pirani Gauges
$196.55 – $353.05 Select optionsThese gauge tubes and controllers are ideal for new applications or as low-cost drop-in replacements to the Convectron® brand of MKS / Granville-Phillips® gauges (available as 1/8″ NPT or KF25)
-
Lesker Silicone Pump Fluids | 704, 704-T, 705Â
$98.00 – $845.00 Select optionsKJLC Pump fluid: 704, 704-T, & 705 1 gallon (705 available in 500cc as well) NOTE:Â Do not use silicone fluids in mechanical pumps.
-
10 Torr Capacitance Manometer | Highly Accurate Pressure Measurement
$1,600.00 Add to cartFull scale capacitance manometer with high accuracy for use in ambient temperature vacuum application settings. Reads from 1mT to 10 Torr with up to .2% accuracy.
-
Bullseye DASH | Portable Calibration Kit with Capacitance Manometer Gauge
$6,985.14 Add to cartThe calibration kit contains our DASH measurement instrument, wide-range sensors and fittings necessary to perform in-situ vacuum measurement and calibration of your process equipment. It is a simple single-box tool kit designed as a quick solution for those who perform validation/calibration of vacuum equipment on a routine basis.
-
Manual Bellows Sealed SS Angle Valves (KF flanged)
$318.00 – $613.00 Select optionsFull scale capacitance manometer with high accuracy up to 1 Torr for use in ambient temperature vacuum applications.
- Double protected from harmful contaminants
- Rapid recovery from atmospheric pressure
- Excellent long-term signal stability
- Corrosive resistant and clean room compliant
-
DigiVac EXACT Carts: Mobile Calibration System | High Vacuum, Pump-down System with Medium Vacuum Control
$63,801.63 Add to cartthe DigiVac EXACT:Â Mobile Calibration system is a turnkey automated pumping system with integrated capacitance manometer standards for calibration stations, enables an operator to easily connect a vacuum chamber, and immediately pump down to high vacuum, vent to Atmosphere, or control at any point between 1 millitorr and 760 Torr.
-
StrataVac Capacitance Manometer Controller | 1 Torr, 10 Torr, or 1000 Torr Ambient Pressure Gauge
$834.44 – $2,142.43 Select optionsThe DigiVac StrataVac CM vacuum gauge uses an ultra-pure alumina ceramic diaphragm, which is corrosion proof and allows for better signal stability, faster recovery from atmosphere, short warm up time, and an extraordinary lifetime
-
Cold Cathode/Pirani Combination Gauge | ATM to Ultra High Vacuum | 760 Torr to 7.6 E-10Â Torr
$1,545.00 Add to cartCold Cathode/Pirani Combination Gauge that measures from 7.6 x 10-10 to 760 Torr (1 x 10-9 to 1000 mbar) using a cold cathode and pirani combination sensor
-
1 Torr Capacitance Manometer | High Accuracy Pressure Sensor
$1,600.00 Add to cartFull scale capacitance manometer with high accuracy up to 1 Torr for use in ambient temperature vacuum applications.
- Double protected from harmful contaminants
- Rapid recovery from atmospheric pressure
- Excellent long-term signal stability
- Corrosive resistant and clean room compliant
