Sweep Gas Regulator | Regulator for Vac Stable, SNAP and Concerto input
The purpose of this regulator is to step down the pressure in a Nitrogen or Argon bottle so it can be safely used as a gas source as an input into standard vacuum or mass flow controller valves.
Agilent IDP-15 Dry Scroll Vacuum Pump, with inlet Isolation Valve | 9 CFM | 115V or 230V (PN X3815-64010)
The IDP-15 scroll pump is cleaner, quieter and easier to maintain than rotary vane pumps.
Bullseye DASH | Portable Calibration Kit with Capacitance Manometer Gauge
The calibration kit contains our DASH measurement instrument, wide-range sensors and fittings necessary to perform in-situ vacuum measurement and calibration of your process equipment. It is a simple single-box tool kit designed as a quick solution for those who perform validation/calibration of vacuum equipment on a routine basis.
Pfeiffer Manual High Vacuum Angle Valve, ISO-KF |ESV-S02100
Pfeiffer HV angle valve With elastomer seals for high vacuum operation Conductance continuously variable with handwheel (multi-turn) PN: ESV-S02100 are used in a wide range of solutions, from industrial applications to research and development systems.
Pfeiffer Measurement cable, 3 m for Gauge
This is a Pfeiffer Sensor Cable 3 meters long. To be hooked up between Pfeiffer Full Range Gauges and the Controller Units. This is a Sensor Signal Cable Only. All Pfeiffer controller units and gauges sold separately on this website.
Pfeiffer HiPace Turbo pump | HiPace® 80 with TC 110, ISO-K
Pfeiffer HiPace 80 Turbo pump models are cost-effective & offer flexible installation in any orientation with pumping speeds that range from 10 – 2,000 l/s. PM P03 940
StrataVac SmartSENS Vacuum Gauge MKS 7.5 x 10 -6 to 1000 Torr | Drop in replacement for MKS901, 925, 910 gauges
StrataVac SmartSENS Vacuum Gauge the high vacuum gauge that combines novel pirani with piezo tech for 7.5 x 10-6 Torr to 1000 Torr.
Manual Bellows Sealed SS Angle Valves (KF flanged)
Full scale capacitance manometer with high accuracy up to 1 Torr for use in ambient temperature vacuum applications.
- Double protected from harmful contaminants
- Rapid recovery from atmospheric pressure
- Excellent long-term signal stability
- Corrosive resistant and clean room compliant
Agilent 536 Thermocouple Gauge Tube Sensor with Baffle | 4 VCR Female Flange | SS PN L6141305
A turbomolecular vacuum pump purge valve by Agilent, 20 SCCM flow rate, 1/4 Swagelok gas supply fitting designed for pumps with M12 vent port thread | 9699242
DigiVac EXACT Carts: Mobile Calibration System | High Vacuum, Pump-down System with Medium Vacuum Control
the DigiVac EXACT: Mobile Calibration system is a turnkey automated pumping system with integrated capacitance manometer standards for calibration stations, enables an operator to easily connect a vacuum chamber, and immediately pump down to high vacuum, vent to Atmosphere, or control at any point between 1 millitorr and 760 Torr.
Pfeiffer ACP 28 CV Version Multi-stage Root Pump For Avoiding Condensable Vapors | V6GVTSGEVF
ACP 28 Series 2 Dry Mechanical Multistage root Pump is Specially designed for Avoiding Traces of Condensable Vapors PN V6GVTSGEVF. These Pfeiffer Adixen ACP series pumps are optimized for operation without lubricants inside the pumping module.
Pfeiffer ACP 28 Multi-stage Root Pump | standard, single phase, manual gas ballast | V6SATSGZMF
ACP 28 Series 2 Dry Mechanical Multistage root Pump is Specially designed for pumping traces of corrosive gas and therefore require an inert gas purge which protects the pump bearings. These Pfeiffer Adixen ACP series pumps are optimized for operation without lubricants inside the pumping module