Lesker 275 Convection Sensor | 1/8″ NPT or KF25 | Convection Enhanced Pirani Gauges
These gauge tubes and controllers are ideal for new applications or as low-cost drop-in replacements to the Convectron® brand of MKS / Granville-Phillips® gauges (available as 1/8″ NPT or KF25)
Convection Enhanced Gauge Cable | 10′ long | Interconnect Cable for Convectron Pirani Gauges
Convectron pirani cable (10′ long) interconnect cable for convection enhanced gauges. Works with MKS 275 sensors part numbers: 275071; 275203
Lesker Silicone Pump Fluids | 704, 704-T, 705
KJLC Pump fluid: 704, 704-T, & 705 1 gallon (705 available in 500cc as well) NOTE: Do not use silicone fluids in mechanical pumps.
Classic Analog Vacuum Gauge | DV-6M with Pointer Meter
The Classic analog Vacuum Gauge includes Hasting DV-6m with pointer meter display can be pole mounted or used on bench top
Key High | Right Angle Valves, Stainless Steel, Electropneumatic, Viton® Bonnet and Poppet
Key High Conductance right angle valve with part number PSA-150-K-N is Electropneumatic and made with SS including a Viton bonnet and Poppet
Key High | Right Angle Valve, Stainless Steel, Manual, Viton® Bonnet and Poppet |SA-150-N-MS
Key High Conductance right angle valve with part number SA-150-N-MS is manual and made with SS including a Viton bonnet and Poppet
Manual Bellows Sealed SS Angle Valves (KF flanged)
Full scale capacitance manometer with high accuracy up to 1 Torr for use in ambient temperature vacuum applications.
- Double protected from harmful contaminants
- Rapid recovery from atmospheric pressure
- Excellent long-term signal stability
- Corrosive resistant and clean room compliant
DigiVac EXACT Cart: Mobile Turbo Calibration System | High Vacuum, Pump-down System with Medium Vacuum Control
The Mobile Turbo Pumping and Calibration System by DigiVac is an automated pumping system with integrated standards, valves and pumps. Easily connect a vacuum chamber for pumping down to high vacuum down to 10 -6 Torr, vent to Atmosphere, or control at any point between .001 to 760 Torr.
FYRA Convectron Controller | Convection-enhanced Pirani
The FYRA Convectron Controller includes a driver card that allows it to be paired up with convection-enhanced pirani sensors (such as the MKS 27501, MKS275203, Lesker KJL275071, and KJL275196) in addition to regular vacuum sensors. Can measure from 1.0 x 10-4 to 1000 Torr. Perfect for Industrial Applications.