Description

0.9 CF Vacuum Drying Oven with 5-sided heat | UL Certified | Max temp 250C (480F)

AT09-UL series digital desktop 0.9 CF Vacuum Drying Oven feature an easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These vacuum ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.

Also come standard are the secondary over-temp protection dial, all stainless steel tubing/compression fittings, stainless steel vacuum/vent valve, oil-filled vacuum gauge, 5 sided pad heating technology and two year warranty. The thermal-conductive aluminum pan shelves provide excellent temperature uniformity inside the chamber, while our 4th gen LCD low proportional gain temperature controllers keep your oven temperature accurate.

These vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.

Attention: Before initial use, run oven at 200°C/400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.

IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Manufacturer is not responsible for any loss of material inside of the oven.

Features

  • Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage. Digivac recommends adding a digital vacuum gauge for more accurate readings and ability to view readings in vacuum units you prefer. The Digivac Bullseye Precision Gauge offers readings in (Torr, mbar, bar, kPa, inches of Hg, mm Hg, millitorr, microns, inches of water, PSI, Pa). Choose this Bullseye with upgraded KF25 sensor to pair with this vacuum oven.
  • For precise vacuum control, Digivac recommends the Vapor Pressure Controller
  • 3rd gen LCD low proportional gain temperature controllers keep your oven temperature accurate.
  • Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time. For clean and quiet vacuum we recommend the IDP-3 vacuum pump
  • Dual layer observation window with 1/2″ tempered safety glass.
  • 3″ thermal insulation prevents heat loss and minimizes the enclosure’s outer surface temperature.
  • Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
  • Built-in alarm will alert you when oven has been shut down by safety circuitry due to out of range temperature.
  • All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with two year warranty and lifetime US-based parts and service support.

 Manufactured in accordance with

  • ISO 9001:2000
  • ISO 12100-1:2003, ISO 12100-2:2003
  • EN1050:1996, EN294:1992, EN60204-1:2006
  • CE

Standard package

Part description  Quantity
Part image
 Ai 0.9 cu ft vacuum oven 1 pc
 Aluminum shelf  4 pcs
Led Light cable 1 pc  
 KF25 quick clamp and centering ring 1 set
 User’s manual 1 pc
Electrical requirements  110V or 220V ±10%, 60Hz, 1-PH, 1,500 watts
 Chamber  Size: 12 x 12 x 11″
Material: Stainless steel
Capacity: 0.9 cubic foot
 Heater  3-sided heating (left 400W, right 400W, bottom 700W)
 Temperature control

 

 

Vacuum

Controller: 3rd gen low proportional gain, microcomputer PID controlled
Range: ambient to 250°C (or 480°F)
Display units: Fahrenheit or Celsius
Uniformity: +/- 5% of setpoint
Dwelling timer range: 1 to 9999 minutes
Warm-up time to 480°F: 80 minutes (Approx.)Mechanical gauge range: 0 to 30 inch mercury
Vacuum port: KF25 flange x 1
Vent port: 1/4″ ball valve
Vacuum pump: Sold separately

Technical Specifications

 Electrical requirements  110V or 220V ±10%, 60Hz, 1-PH, 1,500 watts
 Chamber  Size: 12 x 12 x 11″
Material: Stainless steel
Capacity: 0.9 cubic foot
 Heater  3-sided heating (left 400W, right 400W, bottom 700W)
 Temperature control  Controller: 3rd gen low proportional gain, microcomputer PID controlled
Range: ambient to 250°C (or 480°F)
Display units: Fahrenheit or Celsius
Uniformity: +/- 5% of setpoint
Dwelling timer range: 1 to 9999 minutes
Warm-up time to 480°F: 80 minutes (Approx.)
 Vacuum  Ultimate vacuum level: better than 500 microns/millitorrs
(may vary based on your altitude, click here to learn more)
Mechanical gauge range: 0 to 30 inch mercury
Vacuum port: KF25 flange x 1
Vent port: 1/4″ ball valve
Vacuum pump: Sold separately
 Weight  Unit: 85 Lbs, shipping: 170 Lbs
 Dimensions (WxDxH)  Unit: 23.4 x 17.25 x 19″  With handle and vacuum port: 23.4 x 20 x 19″
Shipping: 29 x 29 x 29″
 Shelves  Included with oven purchase: 4 aluminum slide-in shelves
Capacity: 8 shelves max.
Style: pan-shape
Size: 11.5 x 11.25″
Maximum area: 129.4 x 8 = 7 sq ft or 1035 inch2
Distance between shelves: one inch
 Door gasket material  Silicone or Viton
 Observation window  1/2″ tempered safety glass
 Safety  Built-in circuit breaker
Overheat shutoff protection
 In-door lights  White LED
 Warranty  1 year
 Compliance  CE

Downloads

Drying Recipes SNAP| Oven Guide

Product Inquiry



0.9 CF Vacuum Drying Oven
Ai 0.9 Cu Ft Vacuum Drying Oven | UL Certified with 5 sided heat Max 250C (480F)
$1,650.00