Description
Choose the Agilent IDP10 scroll pump if you want to guarantee universal pumping performance at all input frequencies. Does not contain corrosive, explosive or particulate forming gases. Gives you remote speed control or on/off capabilities.
- Clean with less maintenance
- Oil-free which means no costly pump oil changes
- You don’t have to worry about oil back streaming or migrating into your process
- Really quiet – you can easily have a conversation while it is running right next to you
- Pumping Speeds of 6 CFM or 10.2 m3/h at 60 Hz with a base pressure of 20 millitorr
- Please contact us for latest lead times (inquire for availability)
Clean. Quiet. Reliable. Oil Free
Innovative Hermetic Design for a Cleaner Pump and Lab
- IDP scroll pumps do not use oil, which can spill, leak or infiltrate the vacuum system. Good for your process, lab, and the environment
- The hermetic design provides a clean gas path through the pump, which eliminates any risk of oil or grease contamination allowing the motor and bearings to run at atmospheric pressure, isolating them from exposure to vacuum process gases or water vapor
- Isolated Dry Pumps (IDP) has fully isolated bearings and motor from the vacuum space, which prevents leakage and allows for recovery of process gases
- A DSUB9 connector allows remote switching on/off of the pump as well as fine tuning of pump speed between 1350 and 1900 RPM
- Are appropriate for helium recirculation as well as vacuum oven, and backing pump applications
Less downtime, lower ownership costs
- Traditional pumps demand hours of scheduled maintenance and eliminate expensive oil topping, changing, and disposal | plus the risk of pump seizure
- IDP10 scroll pumps require simple tip seal replacements in 2-3 year intervals and can be completed in about 15 minutes.
Quiet and low vibration
Worried about vibration about delicate lab equipment? Worry no more! The Agilent IDP10 scroll pump operates as quietly as a normal conversation and the scroll design reduces vibration.
Pumping Speed: 170 liters per minute or 10.2 m3 per hour | 6 CFM
Base Pressure: 2.0 x 10-2 mbar or 1.5 x 10-2 Torr
A typical scroll pump like the Agilent IDP10 will achieve a base pressure of 20 mTorr. When you see a gradual increase of your base pressure over time, it is time to change your tip seal
Inlet Connection: NW25
Exhaust Connection: NW16
You can purchase wing clamp and centering rings to go with your pump. Need help setting up your system for a specific application? We have a staff of vacuum engineers that can help build out a system that can meet your needs in one package. Just contact us
Common Applications: Microscopy instruments, surface analysis instruments, helium recirculation, thin film deposition
