Description
Right Angle Valve, Stainless Steel, Manual, Viton® Bonnet and Poppet |SA-150-N-MS
Conductance SA valve
Valve Features
- Liters / Sec: 47.0
- Stainless steel type 304L electropolished valve bodies
- All valve bodies are manufactured using the “Pulled Port” method
- All valve bodies are electropolished for corrosion resistance, minimal surface area and faster pump downs
- Compact physical “footprint” of valve assembly
- Viton® seals standard, upon request other appropriate materials are available
- High conductance design
- Long life stainless steel bellow assembly stem seals
- 3/8″ through 3″ valves have welded bellows stem seals; 4″ valves have formed bellows stem seals
- All weld joints are internal or 100% penetration
Function
Mounting / Testing
Valves can be mounted in any position. However the correct or preferred method is to mount the lower port of the valve (the poppet side) towards the vacuum pump. This helps minimize volume and also helps by “pulling” the poppet closed. All valves guaranteed leak tested on a helium mass spectrometer with a sensitivity of 5 x 10-10 torr.
