Contact Us: (732) 765-0900
Sale!
SNAP Millitorr Automated Vacuum Controller
snap with dcp
rotovap bundle
rotovap bundle

Description

SNAP Millitorr Automated Vacuum Controller | Up to 8 Programmable Recipes | 50 millitorr to 750 Torr Control Range

SNAP: Automatic Vacuum Process Controller | Vacuum control and venting with the touch of a button or twist of a dial

  • The Wide-range automatic vacuum controller with programmable recipes
  • Vent your vacuum chamber or equalize your system with the touch of a button instead of pulling hoses or turning valves
  • Treat material in chamber more gently by implementing kinder ramp rate controls which is ideal for freeze drying, vacuum drying or lyophilization applications
  • Vacuum Controller with onboard ramp rate recipe control. Allows you to program up to 8 recipes based on time and pressure setpoints.
  • Dashboard pushbutton control for START, STOP functionality for each channel allows you to automatically vent or isolate your system with a push of a button
  • Helps you control large volume chambers or small volume vacuum chambers

Ideal for automating and simplifying vacuum chamber pressure control.

  • Vacuum Flange: KF25
  • Measurement and Control Range: 50 millitorr to 750 Torr Control Range

SIMPLE – SIMPLIFY YOUR LAB & CONTROL MORE WITH LESS

  • Applications: vacuum chamber (from ~1 liter to 1000 liters) research, vacuum ovens/vacuum drying, vacuum furnaces, large scale food processing, microwave drying, composites, rotary evaporators, falling film systems
  • Fine control of target vacuum pressure for more precise processing and research
  • Keeps vacuum pumps near their base pressure resulting in greater longevity

NIMBLE – MAXIMIZES THROUGHPUT & PUMPDOWN SPEED

  • Largest flow paths available to insure maximum flow for faster evaporation
  • Maximize throughput and pump down speed with a 20 mm vacuum path (almost full KF25 orifice)

AUTOMATIC PROCESS – PRECISION CONTROL & INTUITIVE DESIGN

  • Automatic Vacuum Process Controller | precise automated control with programmable recipes and graphing of vacuum levels
  • Innovative valve control performs both proportional throttle and bleed vacuum control (vent to atmosphere)
  • The integrated bleed design allows you to quickly vent to atmosphere to stop bumping during processing
  • Numerical readings right on the LCD screen and one touch buttons: VENT, CLOSE (isolate, close all valves) and FULL VAC (fully opens the valve for vacuum pump and closes the vent valve)
  • Onboard Recipe Control: The SNAP can have up to 8 individual steps in the recipe screen, time in any step can be up to 999 minutes in duration. We can ramp or hold….Ramp is work our way up to the setpoint gradually, hold is just “get there” and stay.

SNAP Vacuum Controller Wetted Material: 

  • Viton
  • 304SS
  • 316SS
  • PTFE
  • 567

Product Demonstration Videos

SNAP Controller Hardware

SNAP Controller Software

Downloads

User Manual Data Sheet Quick Start Guide Cleaning Guide Drying RecipesSNAP| Vacuum Oven QS  DV Cup Cheat SheetSNAP| External Sensor QS DCP User Guide

For more documentation, please visit DigiVac’s folder.

Technical Specifications

SNAP

Range of Control: 2 Torr to 760 Torr

Accuracy/ Control:+/- 5% of reading

Time to Convergence Within 5% after disturbance: <30 seconds

Integral Sensor: Isolated Piezo sensor | SEN-775i

  • Integral Sensor Accuracy:+/- 2 Torr
  • Integral Sensor range: 1-775 Torr
  • Integral Sensor wetted materials: 316 Stainless steel, Isolated

Vacuum Path Orifice: Minimum orifice of 20 mm

Minimum Bleed Valve Orifice: 10 mm

Set-Points: Quickly dial in set-points with control knob, START, STOP, Vent or Isolate the System

Vacuum Fittings: KF25 (NW25)

Power: Auto sensing 110 V / 220 V 50/60 Hz power supply

Novel Vacuum Control: proportional throttle and proportional bleed control (vent to atmosphere) delivered from an integral dual valve module

Output: Ability to be controlled remotely via USB for integration into larger systems

Recipes: Ramp Vacuum Controller: Program ramps and holds vacuum at different a duration and vacuum level

Enclosure: 12″ deep x 10.25″ wide x 5.25″ high

Weight:  SS; 13 pounds, Al; 9 pounds

Certifications: Built to CE standards, RoHS

DCP | DuoSens

Range of Control: 2 Torr to 760 Torr

Accuracy/ Control:+/- 5% of reading

Time to Convergence Within 5% after disturbance: <30 seconds

Integral Sensor: Isolated Piezo sensor | SEN-775i

  • Integral Sensor Accuracy:+/- 2 Torr
  • Integral Sensor range: 1-775 Torr
  • Integral Sensor wetted materials: 316 Stainless steel, Isolated

Vacuum Path Orifice: Minimum orifice of 20 mm

Minimum Bleed Valve Orifice: 10 mm

Set-Points: Quickly dial in set-points with control knob, START, STOP, Vent or Isolate the System

Vacuum Fittings: KF25 (NW25)

Power: Auto sensing 110 V / 220 V 50/60 Hz power supply

Novel Vacuum Control: proportional throttle and proportional bleed control (vent to atmosphere) delivered from an integral dual valve module

Output: Ability to be controlled remotely via USB for integration into larger systems

Recipes: Ramp Vacuum Controller: Program ramps and holds vacuum at different a duration and vacuum level

Enclosure: 12″ deep x 10.25″ wide x 5.25″ high

Weight:  SS; 13 pounds, Al; 9 pounds

Certifications: Built to CE standards, RoHS

DPCP | TriSens

Range of Control: 2 Torr to 760 Torr

Accuracy/ Control:+/- 5% of reading

Time to Convergence Within 5% after disturbance: <30 seconds

Integral Sensor: Isolated Piezo sensor | SEN-775i

  • Integral Sensor Accuracy:+/- 2 Torr
  • Integral Sensor range: 1-775 Torr
  • Integral Sensor wetted materials: 316 Stainless steel, Isolated

Vacuum Path Orifice: Minimum orifice of 20 mm

Minimum Bleed Valve Orifice: 10 mm

Set-Points: Quickly dial in set-points with control knob, START, STOP, Vent or Isolate the System

Vacuum Fittings: KF25 (NW25)

Power: Auto sensing 110 V / 220 V 50/60 Hz power supply

Novel Vacuum Control: proportional throttle and proportional bleed control (vent to atmosphere) delivered from an integral dual valve module

Output: Ability to be controlled remotely via USB for integration into larger systems

Recipes: Ramp Vacuum Controller: Program ramps and holds vacuum at different a duration and vacuum level

Enclosure: 12″ deep x 10.25″ wide x 5.25″ high

Weight:  SS; 13 pounds, Al; 9 pounds

Certifications: Built to CE standards, RoHS

Product Inquiry



Products

Services

Resources

Support

Privacy Policy

SNAP Millitorr Automated Vacuum Controller
SNAP Millitorr Automated Vacuum Controller | Up to 8 Programmable Recipes | 50 millitorr to 750 Torr Control
$5,815.50 – $5,979.50