Contact Us:
(732) 765-0900

Description

Yamato DP63C Vacuum Oven | Large Capacity, Programmable 220V

The Yamato DP63C large vacuum drying oven is a large capacity multi-purpose vacuum oven that has an internal volume of 216 liters.  It operates in the temperature range from 40 °C to 200 °C (up to 392° F) and from atmosphere (760) to 1 Torr.

The interior of the vacuum vessel is made of 304 stainless steel and has stainless steel perforated shelves. The vacuum door has a large observation window made Tempered glass and polycarbonate resin plate. These vacuum ovens have good temperature stability with an accuracy of +/- 1 °C at 200 °C and can reach maximum operating temperature within 80 minutes.

The vacuum and vent valves are located on the back of the oven. The Yamato DP63C vacuum oven requires 220 VAC single phase power at 50/60 Hz and 15 Amps.

 

Features

  • Operating Temperature Range of +5 C to 200 C
  • New VS4 Controller with Programmable Features
  • DP-43C offers Digital Readout on Control Panel
  • Mica Heater 3.15 kW
  • PID Control by microprocessor

Benefits

  • Interactive key input of the control panel for easy operation
  • Equipped with high precision functions such as fixed temperature, quick auto stop, auto stop, auto start and program operations for enhanced performance
  • Vacuum reaching time significantly reduced by improvement of the exhaust system, resulting in more efficient operation
  • Vacuum pump can be stored in the bottom cabinet, which is suitable for space limited laboratories
  • Easy removal of piping and maintenance of the vacuum pump
  • Calibration off-set function

Applications

  • Vacuum Drying
  • Vacuum outgassing
  • Clean Process production
  • Curing / Drying
  • Finish baking
  • Shrink fitting
  • Sterilization
  • Burn-in
  • Vacuum bonding
  • Aging / Annealing

DigiVac Recommendations 

  • Optimize your process by adding Automated Vacuum Control: Add the SNAP Vacuum Controller to Automate and Optimize your vacuum drying process. Vacuum Controller with onboard ramp rate recipe control. Set up to 8 recipes based on time and pressure setpoints. Treat material in chamber more gently by implementing kinder ramp rate controls which is ideal for freeze drying, vacuum drying or lyophilization applications
  • SNAP with DPCP:  The SNAP millitorr automated vacuum controller provides precise vacuum control and venting in one device from 750 Torr down to 50 millitorr. Easily control your vacuum process and venting with the touch of a button or the twist of a knob with the SNAP (Simple, Nimble, Automatic Process Controller).

Downloads

Operation Manual | Data Sheet

Technical Specifications

Model DP63C
System Vacuum drying by decompressed chamber direct heating
Operating temp. range 40°C to 200°C
Operating pressure range 101 to 0.1 kPa (760 to 1 Torr)
Temp. control accuracy ±1.0°C (at 200°C)
Max. temp. reaching time ~120 min.
Interior material Stainless steel
Exterior material Cold rolled steel plate with baked-on melamine resin finish
Door Single swing door
Heat insulating material Glass wool
Heater Mica heater, 3.15 kW
Vacuum gauge Bourdon tube type, 0~-0.1 MPa (Gauge pressure)
Observation window Tempered glass and polycarbonate resin plate
Temp. control method PID control by microprocessor
Temp. setting method Digital setting with ▲/▼ keys
Temp. display method Green LED digital display
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. and 50 min.
Min. division 1 min. or 10 mins.
Operation function Fixed temperature, Quick auto stop, Auto-start, Auto-stop, Program operation (16 segments)
Additional functions Calendar timer (max. 24 Hrs.), Integration time (max. 49999 Hrs.), Time display
Heater circuit control Triac zero-cross control
Temp. sensor K-thermocouple (double sensor)
Safety device Self diagnostic functions (Sensor, Heater, Triac, Automatic overheating prevention), Independent overheating prevention, Key lock function, Electric leakage breaker
Internal dimensions WxDxH 600×600×600 mm
External dimensions WxDxH 820×819×1650 mm
Internal capacity 216L
Shelf Support Qty. / Pitch 4 steps / 140mm
Exhaust port / Purge port NW25 flange / Rc 1/4 (18mm O.D.)
Power source 220V, single phase, 15A (no plug, round terminal)
Weight ~290kg
Included accessories 2 perforated stainless steel shelves

Product Inquiry



Yamato DP63C Vacuum Oven | Large Capacity, Programmable 220V
$15,560.00