User Menu

fk101b
FK101B | ResultsFK101B | Pieces

Two Stage Vacuum Pump Exhaust System | 12 cfm

$209.00$255.00

Maintain a safe environment with the All-In-One Vacuum Pump Exhaust Filter System. Proven to effectively eliminate oil mist while removing volatile/semi-volatile organics from exhaust of vacuum pumps.

 

Product Options

Clear selection
  • Description
  • Additional Information
  • Reviews (0)
  • Product Inquiry

Product Description

Includes KF25 Clamp, centering ring, filter housing and filters.  Includes 2 stages:

Stage 1 – Oil Mist Eliminator

  • Eliminates Pump Oil Fumes
  • Returns Used Oil to Vacuum Pump
  • Traps Particles to 0.3 microns
  • Replaceable Coalescing Element

Stage 2 – Charcoal Filter

  • Traps Organic Chemicals
  • Replaceable Charcoal Element

Vacuum pumps are widely used for mass spectrometers and other vacuum equipment and can be a major source of indoor air contamination. It is recommended that vacuum pumps be vented outside the room or to a laboratory exhaust hood. However this is not always practical.

Air contamination by vacuum pumps originates from pump oils and oil contamination. Eventually these organics are exhausted from the pump into the laboratory air. These chemicals can present a serious environmental health problem in the laboratory.

The All-In-One Vacuum Pump Exhaust Filter System has proven to be effective for removing volatile and semi-volatile organics from exhaust of vacuum pumps and helping maintain a safe environment. Without any exhaust filters, organic contaminant’s from the pump oil and hydrocarbons from the pump oil exhausted out of the vacuum pump (bottom chromatograph).

It is recommended that both filters in the All-In-One be replaced on a regular basis. The Carbon Filter (AC-10S) every 30 days and the Coalescing Filter (GL-915R) every six months. When the All-In-One filter is used on a vacuum pump exhaust port, the exhaust from the final stage of filtering has been shown the be cleaner than normal laboratory air.

Additional Information

Port Size

KF16, KF25, KF25 to KF16

Reviews

There are no reviews yet.

Be the first to review “Two Stage Vacuum Pump Exhaust System | 12 cfm”

Product Inquiry


You may also like…

  • Coalescing Filter Element

    Replacement Coalescing Filter (Oil Mist Eliminator) | Part No. GL915R

    $43.00

     

    DigiVac recommends replacing your coalescing filter every 6 months. A suitable filter replacement for the FK101B, FK401B and FK241B two stage exhaust systems. This oil mist eliminator is used to trap hydrocarbons in pump exhaust.

     

    During initial pump down or when using the gas ballast valve, oil vapors exhaust from the vacuum pump. The oil mist eliminator traps the hydrocarbons in this exhaust.

     

    • Eliminates Pump Oil Fumes
    • Returns Used Oil to Vacuum Pump
    • Traps Particles to 0.3 microns
    • Replaceable Coalescing Element

     

    This filter is included in the FK101B, FK401B and FK241B exhaust kits.

     

    Add to cart
  • Replaceable charcoal filter

    Replacement Charcoal Filter | Part No. AC-10S

    $18.50

    DigiVac recommends replacing your charcoal filter every 30 days. A suitable filter replacement for the FK101B, FK401B and FK241B two stage exhaust systems.

    Add to cart