Arometrix met with John and Brian of Hashatron to do some research with extraction finding during a solventless extraction. The purpose of our research was to figure out if the Extraction finder can give actionable information for how to improve a solventless process.
What we learned, and how we can extend the ways to use the Extraction Finder. Optimizing C1D1 instrumentation for C1D2 rated processes,
We created an open source python solution that utilizes serial communication and DV CUP to graphically display vacuum information on a PC. Read more to Learn how to starting our free GUI Link!
The cannabis market uses three main extraction techniques: CO2, liquefied hydrocarbons, and ethanol extraction. Below explains each method and how the extraction takes place and who and why some would use one specific method over another.
Vacuum Instrumentation for Vacuum Drying and Sterilization of Medical Devices Sterilization of medical equipment is vitally important to render a product free from viable microorganisms (such as bacteria, fungi, and viruses). Steam is used in vacuum sterilization processes. The steam is put under pressure that is higher than atmospheric pressure (> 1 bar). A sterilizer configured to run a vacuum cycle will be equipped with a vacuum system. A typical vacuum cycle will begin with a series of alternating steam and pressure injections. The use of a vacuum controller to lower the vacuum pressure this will remove air from the chamber.
