Distillation
-
FYRA Bleed plus Flow Controller | Mass Flow Controller alternative
$3,357.59 Add to cartFYRA Bleed Vacuum Controller is a mass flow controller alternative for venting/bleeding in gases to a chamber. Works in 2 ways: maintaining a particular vacuum or bleeding in a specific flow rate. Speeds up distillations and vacum drying by increasing molecular flow, with a range fom 35 SCCM to 3620 SCCM.
-
FYRA Vacuum Controller Distillation Bundle | 2 Sensors for System with Roughing pump | 10 millitorr to 6 Torr
$3,127.00 – $3,325.00 Select options This product has multiple variants. The options may be chosen on the product pageThis FYRA Vacuum Controller Distillation Bundle includes a high throughput bellows valve for throttle control and 2 thermocouple sensors to monitor the vacuum pressure of the roughing pump, as well as the system itself. Can control from 10 mT to 6 Torr.
-
Fraction Finder ULTRA | Real-Time Molecular Detection | Includes new sensor
$6,166.00 Select options This product has multiple variants. The options may be chosen on the product pageThe Arometrix FRACTION FINDER ULTRA features a brand new ultra-sensitive sensor, serving Chromatography, Conversion Reaction, and Distillation processes
-
Bullseye Piezo | Vacuum to PSI Bluetooth Gauge | UL, CSA, CE | 50 Torr to 85 PSIG
$1,260.00 Add to cartThe Bluetooth Bullseye Precision Gauge Piezo-measures both vacuum and PSI. It provides highly accurate and reliable vacuum reading from 20 Torr to 85 PSIG and 11 additional measurement units.
-
4″ Liquid Nitrogen Cold Trap Straight 1″ OD | LN2
$1,228.50 – $1,493.00 Select options This product has multiple variants. The options may be chosen on the product pageUsed to trap vapor and condense back to liquid after a system run, but prior to release from the trap
-
DigiVac EXACT Carts: Mobile Turbo SNAP System | Automated High Vacuum Pump-down System with Medium and Low Vacuum Control
$55,350.00 – $87,125.00 Select options This product has multiple variants. The options may be chosen on the product pagethe DigiVac EXACT:Â Mobile Automated Turbo system with the SNAP is a high vacuum pump down system includes not only the high vacuum pump, backing and roughing pumps, but also integrates those components into a mobile cart that can control or ramp at any pressure from 50 millitorr to 760 torr, and evacuate to high vacuum at the touch of a button.
Enables an operator to easily connect a vacuum chamber, and immediately pump down to high vacuum, vent to Atmosphere, or control at any point between 50 millitorr to 760 torr
-
PolyScience IP-60 LOW TEMPERATURE COOLER | 1.5″ RIGID COIL PROBE
$3,000.00 Select options This product has multiple variants. The options may be chosen on the product pagePolyScience IP-60 LOW TEMPERATURE COOLER has 1.5″ RIGID COIL PROBE that allows Continuous cooling to temperatures as low as -100°C. 50Hz or 60Hz
-
AMP Cold Trap | Offset KF25 Ports | Modular
Select optionsThe AMP cold trap with offset KF25 ports are designed with ease of operation and maintenance in mind. Can be bought with a LN2 compatible top, 1 liter condensate collection expansion, a site glass for the expansion, and/or a custom end cap for the expansion with a 3/8 swagelok ball valve.
NOTE: Site glass + custom end cap are for the 1 liter expansion only!
AMP Cold Trap Add-ons
-
DigiVac EXACT Carts: Leak Detection Replicating Human Suction
$28,187.50 Add to cartA turnkey leak test system to simulate the human sipping experience created to assist in expediting the testing required in product development by simulating human suction levels. Perfect for testing vacuum suction for Product development teams who might be making straws, bottles with straws, vaporizers or other devices that would require a human to breath in through a device.
