Distillation
-
FYRA Bleed plus Flow Controller | Mass Flow Controller alternative
$3,357.59 Add to cartFYRA Bleed Vacuum Controller is a mass flow controller alternative for venting/bleeding in gases to a chamber. Works in 2 ways: maintaining a particular vacuum or bleeding in a specific flow rate. Speeds up distillations and vacum drying by increasing molecular flow, with a range fom 35 SCCM to 3620 SCCM.
-
FYRA Vacuum Controller Distillation Bundle | 2 Sensors for System with Roughing pump | 10 millitorr to 6 Torr
$3,127.00 – $3,325.00 Select options This product has multiple variants. The options may be chosen on the product pageThis FYRA Vacuum Controller Distillation Bundle includes a high throughput bellows valve for throttle control and 2 thermocouple sensors to monitor the vacuum pressure of the roughing pump, as well as the system itself. Can control from 10 mT to 6 Torr.
-
Fraction Finder ULTRA | Real-Time Molecular Detection | Includes new sensor
$6,166.00 Select options This product has multiple variants. The options may be chosen on the product pageThe Arometrix FRACTION FINDER ULTRA features a brand new ultra-sensitive sensor, serving Chromatography, Conversion Reaction, and Distillation processes
-
Bullseye Piezo | Vacuum to PSI Bluetooth Gauge | UL, CSA, CE | 50 Torr to 85 PSIG
$1,260.00 Add to cartThe Bluetooth Bullseye Precision Gauge Piezo-measures both vacuum and PSI. It provides highly accurate and reliable vacuum reading from 20 Torr to 85 PSIG and 11 additional measurement units.
-
Stainless Steel 4″ Liquid Nitrogen (LN2) Right Angle Cold Trap | NW16
$1,030.05 Add to cartLN2 cold trap with a “cold thimble” design. The surface of the cold thimble containing liquid nitrogen at -187°C, being exposed to the vacuum system, rapidly condenses molecules in the vapor phase. ONLY available in NW16
-
4″ Liquid Nitrogen Cold Trap Straight 1″ OD | LN2
$1,228.50 – $1,493.00 Select options This product has multiple variants. The options may be chosen on the product pageUsed to trap vapor and condense back to liquid after a system run, but prior to release from the trap
-
DigiVac EXACT Carts: Mobile Turbo SNAP System | Automated High Vacuum Pump-down System with Medium and Low Vacuum Control
$55,350.00 – $87,125.00 Select options This product has multiple variants. The options may be chosen on the product pagethe DigiVac EXACT: Mobile Automated Turbo system with the SNAP is a high vacuum pump down system includes not only the high vacuum pump, backing and roughing pumps, but also integrates those components into a mobile cart that can control or ramp at any pressure from 50 millitorr to 760 torr, and evacuate to high vacuum at the touch of a button.
Enables an operator to easily connect a vacuum chamber, and immediately pump down to high vacuum, vent to Atmosphere, or control at any point between 50 millitorr to 760 torr
-
PolyScience IP-60 LOW TEMPERATURE COOLER | 1.5″ RIGID COIL PROBE
$3,000.00 Select options This product has multiple variants. The options may be chosen on the product pagePolyScience IP-60 LOW TEMPERATURE COOLER has 1.5″ RIGID COIL PROBE that allows Continuous cooling to temperatures as low as -100°C. 50Hz or 60Hz
-
AMP Cold Trap | Offset KF25 Ports | Modular
Select optionsThe AMP cold trap with offset KF25 ports are designed with ease of operation and maintenance in mind. Can be bought with a LN2 compatible top, 1 liter condensate collection expansion, a site glass for the expansion, and/or a custom end cap for the expansion with a 3/8 swagelok ball valve.
NOTE: Site glass + custom end cap are for the 1 liter expansion only!
AMP Cold Trap Add-ons
